How To Shave With A Double Edge Safety Razor

How many shaves can you get from a double edge safety razor?

You can follow these steps below to achieve a close, comfortable shave with safety razor: – 1. Firstly wash the face with hot water or a apply a warm towel. Alternatively many people recommend shaving straight after coming out of the shower. Both these methods work well and will help open the skin and hair pores allowing for a closer, more comfortable shave.2.

  • After this has been done, apply a generous amount of pre-shave oil or pre-shave soap or gel to the area you wish to shave.
  • Using a good quality pre-shave treatment will help reduce the friction between the safety razor and the skin, helping it to glide more effectively allowing for a closer shave, whilst protecting the skin at all times.3.

Next, ensure that you have a fresh razor blade in your safety razor. Most safety razor blades can last for 5-7 close, comfortable, tug-free shaves, due to their sharpness and the fact you can use both sides of a safety razor. Ensure that you change the blade at least weekly to guarantee a close, gentle shaving experience.4.

Next ensure that you have put a generous amount of shaving cream or shaving soap on to your face. It is best to do this with a synthetic shaving brush as these types of brushes have an extremely high water retention capability and can create an all round well formed shaving lather quickly and easily.

Ensure that whilst applying shaving cream you lather the face in a circular motion, this ensures that you lubricate the skin properly and get under beard stubble.5. The single biggest mistake committed by those new to safety razor shaving is to apply too much pressure with the razor.

Whilst this isn’t a problem for cartridge razors, this can be very painful with a safety razor. A good quality safety razor will have been developed and designed to have an even weight distribution to allow for a balanced shave, this means that very little pressure is needed. Most nicks and cuts occur at the beginning of a safety razor shave, to prevent this allow the safety razor bar to contact the skin first and then lift the razor to the desired angle, then begin your forward motion.6.

Next and still applying very little added pressure, hold the safety razor loosely in your hand and allow it to glide across the skins surface without pressing it into the skin when shaving. Throughout the shave strive to maintain a thirty degree blade angle relative to the skin.

Whilst this maybe difficult to keep up round the more difficult areas of the face, such as: ear lobes, nose and chin, it is still the optimum angle at which to safety razor shave and you’ll see and feel the results. Next, hold the razor firmly and direct it where you want it to go. Beard bristles must be tackled using short strokes of 25-30 mm at a time, whilst finer hair can be removed using slightly longer sweeping strokes.7.

After shaving, wash the shaved area thoroughly with warm water to remove all traces of shaving cream. Then splash the face with cold water to close the pores, finally apply a light moisturiser or skin food on the skin. This is needed as the protective layers of the skin and nourishing minerals are removed during the shaving process, using a premium quality moisturiser or skin food will help the skin retain more of its moisture and allow it to regenerate faster.8.

Finally remember to take your time whilst shaving with a safety razor. Follow these guidelines on how to shave with a safety razor and you’ll soon pick up the habits and the skills you’ll need to pull of an effortless shave. Remember, you must still remember to take your time as careful diligence will always result in a comfortable, smooth yet close shave.

We want to help you get a great shave every single time, if you have any questions or need some help, please don’t hesitate to get in touch. You can ‘phone us on +44 (0)141 880 3040, email us [email protected], use the We are here! Livechat function on the website, or you can join our Facebook Diamond Club for advice, recommendations, new product launches and more.

Can you use double edge safety razor on pubes?

Pubic area – In the genital area, a safety razor can be used as well as a cartridge razor, but you should already have a little experience with traditional wet shaving. Here it is always particularly essential to tighten the skin to avoid shaving over wrinkles.

Do you use both sides of a double edge razor?

Double edged and cheap as chips – I’ll stick with the theme and double up here. In its entirety, we call this razor the Double Edged safety razor. That’s because you can use both sides of the blade, Double sided – double benefits. Not only can you use both sides, which extends the life of the blade, it also makes for a time saver, as you can switch the side you’re using without so much as a rinse.

  1. I know you guys love a good time saver! Hold up though – money talks.
  2. Beyond all the other benefits, the double edged blades are significantly cheaper than all other modern disposable blades and they last longer.
  3. On average you should be able to get at least 10 shaves out of a blade and they are about 5 times cheaper than a cartridge.
You might be interested:  What Is Legal Register In Safety

Big win! Your safety razor will pay for itself, so why not invest in a luxe shave kit

Are double edge safety razors better?

It’s a no brainer if you are currently using a cartridge razor. A double edge safety razor is much cheaper in the long run. Most importantly though, you will achieve a better quality of shave. With practice, it’s surprisingly easy to use and you will get better access to those hard to reach areas.

How many times should I use a double edge razor?

How Long Should Your Double-Edge Razor Blades Last? It’s no secret that I think safety razors give a substantially closer and smoother shave than any cartridge razor on the market can. And although one of the reasons I switched to a safety razor was that I would save money in the long run, the primary reason was all about better performance.

  1. However, that’s not the case for all guys that make the switch.
  2. In fact, for a lot of guys that are tired of shelling out so much money for cartridge razors, saving money is the sole motivation for switching.
  3. But how do you know if you will actually save money by switching to a safety razor? By doing the math and figuring out how much you would have to spend on razor blades annually.

After all, razor blades and shaving soap/cream are really the only recurring costs a wet shaver has after the initial purchase of a safety razor. So once you have a good estimate of how often you might have to change blades, then you can back into an answer of what your monthly or annual costs might be.

But unfortunately, the answer to how often you will have to change a double edge blade varies, just like it does with a cartridge razor. There’s just no clear cut answer because there are a lot of factors that affect blade durability and longevity. Some guys might be able to get as many as 7 or 8 shaves out of a double-edge blade before needing to change it, while other guys might only be able to get a de blade to last 3 or 4 shaves.

But the purpose of today’s article is to give you at least a general idea of how long your blades should last. Dull blades not only give less than superior shaves, they can also cause skin irritation or small nicks/cuts. How so? Well when a de blade is dull, it won’t smoothly glide across your face.

  1. Which subsequently causes you to overcompensate and use a little force/pressure to shave your beard.
  2. And this is exactly what you want to avoid when using a safety razor.
  3. Essentially, dull blades tug at facial hair before cutting it instead of just mowing those suckers down.
  4. Bottom line – if you want to get a good shave, you need a sharp blade without deformities.

There is no way around it.

How many times should you use a double edge razor blade?

Frequently Asked Questions – No. Razor blades come in different materials from platinum to stainless to chrome. They also have different sharpness straight out of the packet. Have a look at the table below to see different brand’s razor blade sharpness.

  • Double edge razors often can reduce skin irritation, shave bumps, and ingrown hairs compared to disposable cartridge razors, because they have only one razor blade against the skin at one time.
  • Double edge razors have lower waste than cartridge razors.
  • They also provide a much smoother shave than electric razors.

When you notice the razor blade starting to tug on hairs while shaving then it is time to change out the razor blade. For a double edge razor, this is around the 5-10 shaves, although of course is dependent on the brand of razor blade. We have put together this list of razor blade brands and their sharpness below:

Astra Superior Platinum – Super Sharp BIC Chrome Platinum – Super Sharp Feather Hi-Stainless – Super Sharp Wilkinson Sword – Very Sharp Lord Super Chrome – Very Sharp Persona Platinum – Sharp Gillette Super Stainless – Sharp Merkur Platinum – Moderate Derby Extra – Smooth Shark Super Stainless – Super Smooth

Always start shaving with the grain – this means from the top of the face towards the chin. This will remove the bulk of the hair and is the least likely to hurt sensitive skin. After one pass with the grain then you can do another pass against the grain to get a smoother finish.

This really comes down to personal preference. Soap pucks are cheaper and last longer but take longer to build into a lather and a thinner lather. Shaving cream is more expensive but builds into a thick, long-lasting lather. I personally prefer shaving creams. One of the fun parts of wet shaving is trying different soaps and finding the best for your razor and skin type.

The magic angle is 30 degrees as this provides sufficient angle for the blade to run across the skin. This can be different for different razor designs and types. We recommend starting at 30 degrees and adjusting slightly based on your experience and results.

Double edge razors are extremely similar in technique to disposable cartridge razors, and hence they only take 3-5 shaves to learn how to use. Trying out different shaving soaps, creams, razor blades, and pre-shave oils can take several months to find the ideal product for your personnel preference. Alum is an antiseptic that stops nicks and cuts from continuing to bleed.

This is particularly handy for beginners to wet shaving who are likely to get small cuts as they practice shaving with a new technique. Alum is also very useful when shaving because the wet face allows the blood to run. When you notice the razor blade starting to tug on hairs while shaving then it is time to change out the razor blade.

You might be interested:  What Organisational Factors Might Have Negatively Influenced Health And Safety Behaviour

What type of razor gives the closest shave?

2. Is a 3 or 5-blade razor better? – Ans. A three-blade razor tends to provide a closer shave than a five-blade razor due to the extra blades, but it can also be more irritating to the skin. A five-blade razor may be gentler on the skin, but the shave might not be as close. Ultimately, it is up to the user to decide which type of razor is best for them.

Are safety razors the best shave?

Safety Razors Give You a Better Shave: – Shaving with a safety razor reduces skin irritation, shave bumps, and ingrown hairs that are common with cartridge or electric razors. The main reason is that with a safety razor you only have one blade against your skin at any time.

  1. If you use a 5 blade cartridge razor and go over an area of your face 3 times, you have now exposed one area of skin to 15 passes of a blade.
  2. In comparison, if you are using a safety razor, you are only exposing the skin to one blade at a pass.
  3. The fewer times that you rake your face with a blade, the happier it is going to be.

The technique and process of shaving with a safety razor will also help you hone your skill for an optimal shave. The safety razor will let you know when you are doing something wrong, which allows you to adjust your future shaves and continually get better results.

How many times should you use a double edge razor blade?

Frequently Asked Questions – No. Razor blades come in different materials from platinum to stainless to chrome. They also have different sharpness straight out of the packet. Have a look at the table below to see different brand’s razor blade sharpness.

  • Double edge razors often can reduce skin irritation, shave bumps, and ingrown hairs compared to disposable cartridge razors, because they have only one razor blade against the skin at one time.
  • Double edge razors have lower waste than cartridge razors.
  • They also provide a much smoother shave than electric razors.

When you notice the razor blade starting to tug on hairs while shaving then it is time to change out the razor blade. For a double edge razor, this is around the 5-10 shaves, although of course is dependent on the brand of razor blade. We have put together this list of razor blade brands and their sharpness below:

Astra Superior Platinum – Super Sharp BIC Chrome Platinum – Super Sharp Feather Hi-Stainless – Super Sharp Wilkinson Sword – Very Sharp Lord Super Chrome – Very Sharp Persona Platinum – Sharp Gillette Super Stainless – Sharp Merkur Platinum – Moderate Derby Extra – Smooth Shark Super Stainless – Super Smooth

Always start shaving with the grain – this means from the top of the face towards the chin. This will remove the bulk of the hair and is the least likely to hurt sensitive skin. After one pass with the grain then you can do another pass against the grain to get a smoother finish.

This really comes down to personal preference. Soap pucks are cheaper and last longer but take longer to build into a lather and a thinner lather. Shaving cream is more expensive but builds into a thick, long-lasting lather. I personally prefer shaving creams. One of the fun parts of wet shaving is trying different soaps and finding the best for your razor and skin type.

The magic angle is 30 degrees as this provides sufficient angle for the blade to run across the skin. This can be different for different razor designs and types. We recommend starting at 30 degrees and adjusting slightly based on your experience and results.

Double edge razors are extremely similar in technique to disposable cartridge razors, and hence they only take 3-5 shaves to learn how to use. Trying out different shaving soaps, creams, razor blades, and pre-shave oils can take several months to find the ideal product for your personnel preference. Alum is an antiseptic that stops nicks and cuts from continuing to bleed.

This is particularly handy for beginners to wet shaving who are likely to get small cuts as they practice shaving with a new technique. Alum is also very useful when shaving because the wet face allows the blood to run. When you notice the razor blade starting to tug on hairs while shaving then it is time to change out the razor blade.

How many times should I use a double edge razor?

How Long Should Your Double-Edge Razor Blades Last? It’s no secret that I think safety razors give a substantially closer and smoother shave than any cartridge razor on the market can. And although one of the reasons I switched to a safety razor was that I would save money in the long run, the primary reason was all about better performance.

However, that’s not the case for all guys that make the switch. In fact, for a lot of guys that are tired of shelling out so much money for cartridge razors, saving money is the sole motivation for switching. But how do you know if you will actually save money by switching to a safety razor? By doing the math and figuring out how much you would have to spend on razor blades annually.

You might be interested:  How Many Cars Have A 5 Star Safety Rating

After all, razor blades and shaving soap/cream are really the only recurring costs a wet shaver has after the initial purchase of a safety razor. So once you have a good estimate of how often you might have to change blades, then you can back into an answer of what your monthly or annual costs might be.

But unfortunately, the answer to how often you will have to change a double edge blade varies, just like it does with a cartridge razor. There’s just no clear cut answer because there are a lot of factors that affect blade durability and longevity. Some guys might be able to get as many as 7 or 8 shaves out of a double-edge blade before needing to change it, while other guys might only be able to get a de blade to last 3 or 4 shaves.

But the purpose of today’s article is to give you at least a general idea of how long your blades should last. Dull blades not only give less than superior shaves, they can also cause skin irritation or small nicks/cuts. How so? Well when a de blade is dull, it won’t smoothly glide across your face.

Which subsequently causes you to overcompensate and use a little force/pressure to shave your beard. And this is exactly what you want to avoid when using a safety razor. Essentially, dull blades tug at facial hair before cutting it instead of just mowing those suckers down. Bottom line – if you want to get a good shave, you need a sharp blade without deformities.

There is no way around it.

How do you start shaving with a safety razor?

How to shave with a safety razor – 1. Get a good razor A weighted razor handle will give you the right amount of balance and force for the shave—for a process that requires no additional pressure. This isn’t something you should cheap out on, so please put your dollars into the razor handle.

Davie gave us his current three favorites: Rockwell Razors 6S adjustable safety razor “This razor reigns supreme,” Davie says. Unlike most razors on the market, it’s highly adjustable to control exactly how much blade sticks out. Viking Godfather safety razor This one has a relatively “mild” head, meaning it’s less likely to cause irritation—great for guys with sensitive skin.

Because the mass of the razor is what presses against your skin, weight is an important variable— Davie says this relatively heavy razor is perfect for head shaves and anyone else who prefers a bit more pressure.2. Find Your Perfect Blade All safety razor blades fit all razors, but some razors just play better with certain blades.

Davie recommends buying a sample pack online to start in order to try a range of options—but these are his personal favorites. Personna Lab double-edge safety razor blades (200 pack) Affordable and consistent—these are an excellent starter option. Wilkinson Sword double-edge safety razor blades (100 pack) Another good starter option, these German-made blades are relatively gentle—good for guys with sensitive skin.

Feather double edge safety razor blades (50 pack) Famously sharp—often preferred by guys with a bit of safety razor experience under their belt. “A household name amongst barbers,” says Davie.3. Start with a fresh blade Replacement safety blades are so inexpensive that there’s really no reason you should reuse them.

  • Simply unscrew the head, toss the used blade in the trash bin (perhaps wrapped in some toilet paper to prevent any accidents).4.
  • Prepare the skin as usual Readying for a safety razor shave is no different than prepping for a cartridge shave,
  • You need to soften the skin and whiskers with warm water, then apply a pre-shave oil to nourish and condition both for the shave.5.

Pull the skin taut Here’s where we get into the actual shave. First things first: Keep the skin tight as you shave. You don’t want to drag the razor, lose your grip, or accidentally apply pressure. You can do this by maintaining a smooth, steady surface.

So, turn your face, angle your neck, maybe open your mouth, and pull the skin taut.6. Maintain a 30-45 degree angle, applying no pressure The weighted handle should be giving you all the force you need to shave clean and steady—no additional pressure is needed once that blade is on your face. You want to hold it roughly 30-45 degrees away from the skin.7.

Shave with the grain Track the direction your hair grows. You need to shave with this grain, not against it. You might need to study your growth patterns in advance of shaving, or shave with a translucent gel or oil. Your hair doesn’t all grow in the same direction, either, so pay close attention.8.

  1. Use short, straight strokes You want to shave in small, steady spurts, rinsing between.
  2. Minimize dragging.
  3. Do a single pass over a small patch, then lift and resume with the patch below it.
  4. You can rinse between, and switch sides of the blade, but do your best not to re-shave any single patch of skin to avoid irritation.9.

Rinse with cold water and apply post-shave balm It’s business as usual on the other end of the shave, too: After shaving, close the pores with a splash of cold water, then apply a refreshing, cleansing, and protective layer atop the skin, in the form of a post-shave balm.