Meaning of road safety – Road safety teaches people how to conduct themselves while driving or crossing roads. Road safety measures are aimed at reducing the risks of people getting involved in accidents in the first place. Following these measures, the chances of accidents, injuries and damage to property are vastly reduced.

What is the 1st general order?

1st General Order I will guard everything within the limits of my post and quit my post only when properly relieved.2nd General Order I will obey my special orders and perform all my duties in a military manner.

What is the General Order 8?

8. To give the alarm in case of fire or disorder.

What is area command?

Area Command: An organization that oversees the management of multiple incidents or oversees the management of a very large or evolving situation with multiple ICS organizations. See Unified Area Command. Assigned Resource: A resource that has been checked in and assigned work tasks on an incident.

Which leg is used for attention?

Stationary drill consists of drill movements that are accomplished without marching. The drill positions of attention and parade rest are two perfect examples. Other stationary drill commands include parade rest, at ease, left (or right) face, about face and fall out.

• Some commands, such as present arms and order arms, can be accomplished while moving or while stationary.
• Warning: If you don’t remember anything else, do not forget to unlock your knees when you’re participating in stationary drill.
• Bend your knees just enough so that it is not visible that you’re doing so but enough to allow the blood to flow smoothly through your legs.

Failing to unlock your knees will impede the blood flow to your brain so that, after a time (and you will find that stationary drill in the military often requires you to stand still for long periods), you’ll grow faint and pass out. It’s not a pleasant experience to suddenly find yourself abruptly kissing the asphalt of a parade grinder or the steel of a ship’s deck.

Attention To come to the position of attention (see Figure 9-1), bring the heels together smartly (by moving the left foot only) and on line. Place the heels as near each other as the conformation of the body permits and ensure that the feet are turned out equally, forming a 45-degree angle. Keep the legs straight without stiffening or locking the knees.

The body is erect with hips level, chest lifted, back arched, and shoulders square and even. Arms hang straight down alongside the body without stiffness, and the wrists are straight with the forearms. Place thumbs, which are resting along the first joint of the forefinger, along the seams of the trousers or sides of the skirt.

Hands are cupped (but not clenched as a fist) with palms facing the leg. The head is kept erect and held straight to the front with the chin drawn in slightly so that the axis of the head and neck is vertical; eyes are to the front, with the line of sight parallel to the ground. The weight of the body rests equally on the heels and balls of both feet, and silence and immobility are required.

Remember: To resume the position of attention from any of the rests (except fall out), the command is Flight/Squadron/Group, (group name). Attention. On the preparatory command of Flight, or Squadron, or Group, the individuals assume the position of parade rest.

At the command “Attention,” assume the position of attention. Parade rest This command can be given only when the formation is at the position of attention. The Preparatory Command is “Parade,” and the Command of Execution is “Rest.” On the command “Rest,” the recruit will raise the left foot just enough to clear the ground and move it smartly to the left so that the heels are 10 inches apart, as measured from the inside of the heels.

Keep the legs straight, but not stiff, and the heels on line. As the left foot moves, bring the arms, fully extended, to the back of the body, uncupping the hands in the process, and extend and join the fingers, pointing them toward the ground. The palms will face outward.

Place the right hand in the palm of the left, right thumb over the left, to form an X. Keep head and eyes straight ahead and remain silent and immobile. At ease The command is “At ease.” On the command, you may relax in a standing position, but you must keep your right foot in place. Your position in the formation will not change, and silence will be maintained.

Your arms may be relaxed, but your thumbs must also stay interlaced. Fall out The command is “Fall out.” On the command, you may relax in a standing position or break ranks (move a few steps out of formation). You must remain in the immediate area and return to the formation on the command “Fall in.” Moderate speech is permitted.

• Right (or left) face This command can be given only when the formation is at the position of attention.
• The commands are “Right face” or “Left face.” On the command “Face,” raise the right (left) toe and left (right) heel slightly and pivot 90 degrees to the right (left) on the ball of the left (right) foot and the heel of the right (left) foot, assisted by slight pressure on the ball of the left (right) foot.

Keep legs bent naturally, not stiff. The upper portion of the body remains at attention. This completes count 1 of the movement. Next, bring the left (right) foot smartly forward, ensuring that your heels are together and on line. Feet should now be forming a 45-degree angle, which means the position of attention has been resumed.

This step completes count 2 of the movement. About face This command can be given only when the formation is at the position of attention. The command is “About, face.” On the command “Face,” lift the right foot from the hip just enough to clear the ground. While naturally bending the knees, place the ball of the right foot approximately half a shoe length behind and slightly to the left of the heel.

Distribute the weight of the body on the ball of the right foot and the heel of the left foot. Keep both legs straight but not stiff. The position of the foot has not changed. This step completes the first part of the movement. Keeping the upper portion of the body at the position of attention, pivot 180 degrees to the right on the ball of the right foot and heel of the left foot, with a twisting motion from the hips.

• Suspend arm swing during the movement and remain as though at attention.
• On completion of the pivot, heels should be together and in line and feet should form a 45-degree angle.
• The entire body is now at the position of attention.
• Hand salute The command is “Hand, salute.” On the command “Salute,” you raise the right hand smartly in the most direct manner while at the same time extending and joining the fingers.

Keep the palm flat and facing the body. Place the thumb along the forefingers, keeping the palm flat and forming a straight line between the fingertips and elbows. Tilt the palm slightly toward the face. Hold the upper arm horizontal, slightly forward of the body and parallel to the ground.

Ensure that the tip of the right forefinger touches headgear to the right of the right eye. If wearing a nonbilled hat, ensure that the index finger touches the outside corner of the right eyebrow or the front corner of glasses. The rest of the body will remain at the position of attention. Warning: This procedure is used (in some of the branches) for training purposes only.

This command is not usually used in actual military ceremonies. Present arms and order arms This procedure can be performed both during stationary drill and while marching. When not under arms (carrying a rifle), the commands are “Present, arms” and “Order arms.” On the command “Present, arms,” the individual executes the hand salute.

Then the hand salute ends when given the command, “Order arms.” When under arms, to present arms, you bring your weapon up in front of you with the trigger facing away from your body; order arms is executed by returning the weapon to your side so that the butt is resting on the floor/ground/deck next to your right foot.

From Basic Training for Dummies, copyright © 2011 by Wiley Publishing, Inc., Hoboken, New Jersey. Used by arrangement with John Wiley & Sons, Inc.

What is REST in Java?

RESTful web services are built to work best on the Web. Representational State Transfer (REST) is an architectural style that specifies constraints, such as the uniform interface, that if applied to a web service induce desirable properties, such as performance, scalability, and modifiability, that enable services to work best on the Web.

• In the REST architectural style, data and functionality are considered resources and are accessed using Uniform Resource Identifiers (URIs), typically links on the Web.
• The resources are acted upon by using a set of simple, well-defined operations.
• The REST architectural style constrains an architecture to a client/server architecture and is designed to use a stateless communication protocol, typically HTTP.

In the REST architecture style, clients and servers exchange representations of resources by using a standardized interface and protocol. The following principles encourage RESTful applications to be simple, lightweight, and fast:

Resource identification through URI : A RESTful web service exposes a set of resources that identify the targets of the interaction with its clients. Resources are identified by URIs, which provide a global addressing space for resource and service discovery. See The @Path Annotation and URI Path Templates for more information. Uniform interface : Resources are manipulated using a fixed set of four create, read, update, delete operations: PUT, GET, POST, and DELETE, PUT creates a new resource, which can be then deleted by using DELETE, GET retrieves the current state of a resource in some representation. POST transfers a new state onto a resource. See Responding to HTTP Methods and Requests for more information. Self-descriptive messages : Resources are decoupled from their representation so that their content can be accessed in a variety of formats, such as HTML, XML, plain text, PDF, JPEG, JSON, and others. Metadata about the resource is available and used, for example, to control caching, detect transmission errors, negotiate the appropriate representation format, and perform authentication or access control. See Responding to HTTP Methods and Requests and Using Entity Providers to Map HTTP Response and Request Entity Bodies for more information. Stateful interactions through hyperlinks : Every interaction with a resource is stateless; that is, request messages are self-contained. Stateful interactions are based on the concept of explicit state transfer. Several techniques exist to exchange state, such as URI rewriting, cookies, and hidden form fields. State can be embedded in response messages to point to valid future states of the interaction. See Using Entity Providers to Map HTTP Response and Request Entity Bodies and “Building URIs” in the JAX-RS Overview document for more information.

Copyright © 2013, Oracle and/or its affiliates. All rights reserved. Legal Notices

What is a command API?

The command API is designed to send commands to your BeyondTrust site from an outside application. Commands can get or set session attributes, join an existing session, or terminate a session. You can also check the health of your B Series Appliance or get information about your BeyondTrust API version.

Commands are executed by sending an HTTP request to the B Series Appliance, Send the request using any HTTPS-capable socket library, scripting language module, or URL fetcher such as cURL or wget, Use either GET or POST as the request method. POST requests must include a “Content-Type: application/x-www-form-urlencoded” HTTP header when supplying parameters in the request body, and the parameters must be url-encoded.

Multipart POST requests are not supported. When making consecutive API calls, you must close the connection after each API call. The command API URL is https:// access.example.com /api/command, The command API is an authenticated API. For instructions on using authenticated APIs using OAuth, please see Authenticate to the Privileged Remote Access API,

What is an API method?

In API Gateway, an API method embodies a method request and a method response, You set up an API method to define what a client should or must do to submit a request to access the service at the backend and to define the responses that the client receives in return.

For input, you can choose method request parameters, or an applicable payload, for the client to provide the required or optional data at run time. For output, you determine the method response status code, headers, and applicable body as targets to map the backend response data into, before they are returned to the client.

To help the client developer understand the behaviors and the input and output formats of your API, you can document your API and provide proper error messages for invalid requests, An API method request is an HTTP request. To set up the method request, you configure an HTTP method (or verb), the path to an API resource, headers, applicable query string parameters.

1. You also configure a payload when the HTTP method is POST, PUT, or PATCH,
2. For example, to retrieve a pet using the PetStore sample API, you define the API method request of GET /pets/, where is a path parameter that can take a number at run time.
3. GET /pets/1 Host: apigateway.us-east-1.amazonaws.com,

If the client specifies an incorrect path, for example, /pet/1 or /pets/one instead of /pets/1, an exception is thrown. An API method response is an HTTP response with a given status code. For a non-proxy integration, you must set up method responses to specify the required or optional targets of mappings.

• These transform integration response headers or body to associated method response headers or body.
• The mapping can be as simple as an identity transform that passes the headers or body through the integration as-is.
• For example, the following 200 method response shows an example of passthrough of a successful integration response as-is.200 OK Content-Type: application/json,

In principle, you can define a method response corresponding to a specific response from the backend. Typically, this involves any 2XX, 4XX, and 5XX responses. However, this may not be practical, because often you may not know in advance all the responses that a backend may return.

In practice, you can designate one method response as the default to handle the unknown or unmapped responses from the backend. It is good practice to designate the 500 response as the default. In any case, you must set up at least one method response for non-proxy integrations. Otherwise, API Gateway returns a 500 error response to the client even when the request succeeds at the backend.

To support a strongly typed SDK, such as a Java SDK, for your API, you should define the data model for input for the method request, and define the data model for output of the method response.

Jack Gloop